1925th Blasting Customs Clearance
Opened a new book: The End of the World: My House Can Be Upgraded, Brothers Help Collect, Give Some Recommendations!
*******************
The breakthrough of Chuncheng Institute of Optics and Mechanics has made many domestic chip factories overjoyed.
We must know that our lithography machines have not been able to make breakthroughs before. In fact, the main point is the light source system.
The light source, timing, and exposure of the entire lithography machine must be integrated into a system.
For example, the entire exposure system of a lithography machine requires a light source from Seymer in the United States, a laser from Trumpf in Germany, and a lens from Zeiss in Germany.
And these brands, no matter which one is singled out, are the masters in their respective fields.
And we can only rely on the Chuncheng Institute of Optics and Mechanics to fight alone.
And when it comes to funding, we are far behind others.
For example, the Institute of Optics and Mechanics in Spring City last year had a budget of only 3.3 billion yuan.
For example, the above-mentioned giants, it can be said that they can't even compare to a fraction of others.
For example, Seymour, which is an extreme ultraviolet light source, spends more than 3.3 billion U.S. dollars a year on research and development, not to mention profits.
The most well-known of these three companies is Germany's Zeiss, and the annual net profit of this company is more than 3.3 billion US dollars.
Compared with them, our Chuncheng Institute of Optics and Mechanics really eats grass and squeezes out milk.
With only 3.3 billion soft sister coins, it is not only for the shots of airplanes and satellites.
We also need to do the exposure system of the lithography machine, which is really what people are using it for.
But with the support of such low conditions, Chuncheng Institute of Optics and Mechanics managed to overcome the exposure system of 28nm light source, and was able to achieve the level of mass production.
In fact, as early as two years ago, we had already conquered the 28nm chip process technology.
But the good product rate has not been able to increase, and the good product rate of Tejiji and Sansang chips at this level has been able to reach more than 95%.
But after two years of hard work,
That is to say, let's see that the good product rate is about 50%.
And with the addition of the light source of the Spring City Institute of Optics and Mechanics, our yield rate will naturally be greatly improved.
Although it still can't catch up with Tejiji and Sansang's 90% good product rate, at least it has brought the gap between us and those two closer.
The reason why there is still a gap lies in the craftsmanship of other processing processes.
There is no way, although the chips are basically produced by high-tech equipment.
But in fact, many key points in the middle still depend on people.
And we are lacking key talents in many steps in this processing.
This is where we really lack technical talents.
And this time with the help of the Japanese, Chuncheng Institute of Optics and Mechanics has doubled the production process of the light source system.
Completed the 28nm process, a big leap to the 14nm process.
It seems that the manufacturing process has only been doubled, but the actual effect is incredible.
The efficiency of the 14nm process chip is 20% higher than that of the 28nm process chip, while the energy consumption is reduced by 57%...
If this light source system is used to produce carbon nanotube chips, it will be able to fully upgrade the carbon nanotube chip technology we currently have.
And if it is a carbon nanotube chip, the 14nm process carbon nanotube chip is 40% higher in performance and efficiency than the 28nm carbon nanotube chip.
As for energy consumption, it can be reduced by a full 60%.
No way, this is determined by the nature of carbon-based chips.
And this major breakthrough made by Spring City Institute of Optics and Mechanics can be said to make our country take a full step forward in the fields of silicon-based chips and carbon-based chips.
Especially in the field of carbon-based chips, this one is particularly important.
Because at present, although our country has mastered the production and manufacturing technology of carbon nanotube chips.
To be honest, we are still in the process of exploring and perfecting the production process for the production of carbon nanotube chips.
After all, this is a brand new product, and although you have produced this chip, if you assemble it into a whole machine.
Then, do other components in the machine also need to be adjusted, otherwise, if they are directly hard-linked to the silicon-based chip.
Will there be conflicts between hardware, or will it cause a waste of efficiency.
So these are in the groping stage.
And with this kind of chip, you can use it to make more than just mobile phones.
There are also desktop computers, laptops, tablets, and even servers, supercomputers, and many other large electronic devices that need to use this chip.
So now our carbon nanotube chips are only at the stage of producing 28nm process.
Because after all, this kind of chip is just born, even with the technical support of Xinghuo Technology, a black technology company behind it.
But they didn't dare to take out the full set of production equipment and mature production technology at one time.
After all, the production of this kind of chip requires a lot of brand new production equipment, all of which need to be designed and manufactured by ourselves.
There are also a lot of supporting hardware, which also needs to redesign the production equipment and develop the production process, all of which fall on the head of Xinghuo Technology.
So during this period of time, we are basically producing, improving, and replacing.
Therefore, the recent production and manufacture of carbon nanotube chips can be said to have been in the climbing stage.
The yield rate has been rising, from the original 30% to 60%.
This shows that there is still a lot of potential to be tapped. According to the normal law, at least it has to climb to 90% or 95%.
Only then can it show that the technology is mature.
Why do we have to die in a 28nm carbon nanotube chip technology!
That's because of the principle of Yilitong Bailitong.
As long as we have a thorough understanding of the manufacturing process of carbon nanotube chips in the 28nm process, it will be time to upgrade in the future.
For example, when producing 14nm, or 7nm, or 5nm carbon nanotube chips, we can have traces to follow.
To do things according to the rules is to get twice the result with half the effort.
This is equivalent to a process of land reclamation, and it is also an opportunity to specify rules and procedures.
In the future, once the carbon nanotube chip manufacturing technology is promoted to the world, then we will be the rule makers.
Therefore, this rule must be perfect, and there must be no loopholes for those foreigners to exploit.
So we are not in a hurry...
Moreover, although the production capacity of carbon nanotube chips has been climbing, the market is still in short supply.
Such a chip with such excellent performance is in great demand in the market.
The first is to satisfy the self-use of Xinghuo Technology, and other scientific research units such as the Ninth Laboratory and the laboratory of the Celebrity Chef Group.
After all, their company's computers, servers, and so on must no longer use American products.
Because since they made breakthroughs one after another, they blasted and cleared the control cards set up by the United States.
Americans are also anxious, and many times they don't even want that, and they just tear their faces.
Hacking attacks on us through the Internet at every turn.
But after discovering that hacking attacks are not easy to use, they simply used the hardware backdoor.
For example, on chips and motherboards, they have arranged backdoors.
But later, when they found out that the method of playing hooligans through the back door was not easy to use, they even launched a physical attack directly.
Directly detonate your motherboard and server by remote control. Anyway, if I can't get it, you can't get it either.
I can't get it, and I can't make you happy either.
In the previous period of time, the computers and servers of these companies frequently burned circuit boards and crashed.
Can bring no small loss to these companies.
So now that we have our own chips, we naturally have to replace them with American ones.
In addition to these companies, there are partners such as H company, which is also one of the main users.
Now their mate50 flagship machine has been bought and flew, and the popularity exploded directly.
100 million units were shipped domestically...
What kind of concept is this damn, it is to put all the friends and businessmen on the ground, and even take a big bite out of the apple.
And looking at the current situation, the sales of their flagship phone have no intention of stopping.
It seems that it should not be a problem to sell 100 million units in China.
Next, of course, is to go to sea.
And they predict that at least 100 million units will be sold in Southeast Asia and Europe.
However, they have no plans to go to sea recently.
Because there are many restrictions in foreign countries, especially their carbon nanotube chip mobile phones, in terms of Internet access, they will be made things difficult by those foreigners.
Especially in the European market, it is very troublesome anyway.
And what they have to do now is to stabilize the domestic market first...
Moreover, in addition to mobile phones, Company H has recently been developing computers and tablets with this chip as the core.
Yes, their purpose is to kill all assembly plants.
As for their products, it is naturally supported.
To be honest, the computers purchased by our government in the past were all assembled products. The core components of the hardware were all from the United States, and the operating system was also from the United States.
We have already suffered losses in this area not once or twice...
Now, with the support of Xinghuo Technology, Company H has finally made a major breakthrough in mobile phones and operating systems.
Naturally, the above is looking forward to, and they can also make breakthroughs in office computers as soon as possible.
Although the computer and the tablet have reached the testing stage, even so, some important government departments have already placed a lot of orders for H Company.
As for their flagship machine, not to mention, it is also a work machine designated by many government departments, enterprises and institutions.
Even many important files must be saved and transferred on this phone...