One Thousand Nine Hundred and Fifty The Rise of Machine Tools

Brothers, I have opened a new book again: Restarting Life: I can call myself ten years ago. Brothers, help me collect it and give some recommendations!

******************

What kind of company is this?

Isn’t this just like H Company in the machine tool industry?

It's just that their products don't have the characteristics of fast-moving consumer goods, and they don't have as many users as H's mobile phones.

That's why this company is not as well-known as Company H.

But in the domestic machine tool industry, before there was Spark Technology, you could mention Guangyang’s name.

No matter who it is, who can’t give a thumbs up?

Of course, except for Shepherd, mainly the customers who use their machine tools.

Some of the high-end machine tools they produce, especially the mainstream five-axis CNC machine tools, are basically on par with German and Japanese machine tools in terms of performance.

The difference lies in the ultra-high precision of six-axis and nine-axis, as well as in stability and a few core components.

But even so, their machine tools are sufficient in many fields.

For example, the processing of engines, turbine shafts and blades of our domestic large aircraft.

It was done by their machine tools. Of course, that was before Spark Technology.

There is also the large seven-blade propeller used by our submarines before the use of turbojet technology, which was also processed by their machine tools.

However, due to some technical reasons, their machine tool production capacity is limited, so they are not well-known in the domestic machine tool industry.

But in terms of promotion, it has never spread.

Because the owners of domestic private companies are unwilling to use it!

Perhaps it is also because of the shadow of domestic machine tools in the past that the bosses of the domestic manufacturing industry have lingering fears about domestic machine tools.

In addition, Koyo's machine tools are not cheap. After all, they are forced to have a localization rate of 95%.

It can be said that to build a machine tool, they not only have to build the machine tool, but they even have to make the special tools themselves.

As a result, R&D costs are naturally high, and the R&D expenses amortized to each machine tool are naturally not cheap.

In order to squeeze domestic machine tool companies, the price of Japan's Yamazaki Mazak is quite beautiful.

You can buy one for as much as one hundred thousand dollars or as cheap as two or three hundred thousand dollars.

In addition, there are Doosan from the Southern Dynasties and several machine tool brands from Wanwan, and their performance is also acceptable.

Put it this way, who among the owners of small and medium-sized enterprises is willing to use domestically produced products?

And machine tools are nothing more than computer systems.

You just use it, and more people use it, and more bugs are reported. Then the company continues to make adjustments and modifications based on the feedback, and only then can you practice it.

Take Doosan for example. When their machine tools were manufactured, everyone was calling them rubbish.

But the Southern Dynasty's state-owned enterprises are tough. I would rather have high costs and produce a lot of waste.

I also stick with Doosan.

Especially after Hyundai and Kia entered the rabbit country, the Qingyishui used in their production lines were all Doosan machine tools.

As they buy more and more cars in China, Doosan's bugs are fixed faster and faster.

That was ten years ago, Doosan's machine tool technology had achieved rapid development.

Doosan, which used to be inferior to even Wanwan's machine tools, has now become a new level second only to Japanese machine tools.

And what about us?

Haha, just like Mr. Yu said.

Those of us who run businesses are all speculators, not entrepreneurs.

There are not many people who think about running the company in the long run and turning it into a century-old company.

Most of them want to take advantage of the east wind, earn as much as they can, and then leave with a quick buck.

In many companies, the boss himself is in China, but his wife and children are either in Australia or Canada.

Some people even joked that our financial center is in Shanghai, and the financial center of Shanghai is in Vancouver...

Forget it, I can’t say more. If I say too much, the God of Harmony will stare at me again.

Because of this, although Koyo's machine tools are good, sales have been unable to increase.

But this time is different, with the help of Spark Technology.

The quality of Koyo's machine tools immediately improved, especially the system that had been stuck before, as well as the core servo motor reducer and ball screw bearings.

In the past, we could produce them ourselves, but the yield rate was low, and some parts even had to be polished bit by bit manually.

So the cost is naturally high.

But now, with the help of Spark Technology, labor is no longer required, and the yield rate has increased even more.

The cost dropped instantly!

As for the system, let alone that.

I used to want to use Siemens' system, but Siemens was coy and wouldn't give it to you anyway.

So it can only be equipped with Huake, but to be honest, the standard of this system developed by Huazhong is really far behind Siemens.

Even worse than Mazak.

Spark Technology directly provided a set of artificial intelligence powered by Xiao Ai, and then added its own programming library.

Now with the help of this system, Koyo's machine tools can be said to be twice as powerful as before, both in terms of processing accuracy and efficiency.

Moreover, Spark Technology has also provided Guangyang with a more accurate positioning system.

Not only are the machine tools equipped with new sensors, but with the help of Xiaoai's artificial intelligence, the precision positioning is more than twice as good as before.

You know, in the past, our machine tools were not very stable, and there was a huge gap between them and foreign machine tools.

For example, if you are processing a workpiece, others can achieve two μm.

And we can’t even do one μm, why?

Because laser ranging is awesome!

An iron lump is placed on the fixture, and the tool continues to cut on the iron lump.

For each part, how much is cut out, what shape it becomes, and how far it is from the system setting requirements.

Other people's machine tools can be positioned accurately, and then continuously adjust the feed speed and angle of the tool according to the changes in the iron bumps to continue cutting, turning and milling.

As for our machine tools, they are not accurate in terms of measurement, not to mention feed accuracy.

Sometimes even if the feed accuracy is accurate, the hardness of the tool is not good enough.

You want to give such deep precision, but the blade is so dull that you can't give it even if you want to!

Therefore, the gap in machining accuracy of this workpiece naturally emerges.

A workpiece is two μm different from others. When an engine that requires hundreds or thousands of workpieces to be assembled comes out, how much difference do you think it will be?

After a BMW engine is assembled, the tolerance requirements of the entire engine must be controlled within 2 μm.

This is one of the main reasons why other people's engines are so awesome.

As for our engine... I won’t mention it...

Guangyang already had a very good foundation, this time with the help of Xinghui Technology.

That can definitely be said to be even more powerful.

Moreover, Xinghuo Technology not only helps them improve the quality of machine tools, but is also their largest customer.

For example, in the factory here in Yongji City, except where second-generation flexible machine tools must be used.

In other production lines, they use Guangyang whenever they can.

For no other reason than to support this big brother.

And he also made requirements for his partners, that is, use Guangyang whenever possible.

For example, CEO Booth of Rice plans to enter the screen industry this time. Although he bought someone else's factory.

But the production line still needs to be updated.

And at least fifty to one hundred new machine tools were needed. Originally, he thought of buying Japanese or German products.

But as soon as Xinghuo Technology told him, he immediately placed an order for Guangyang.

I originally thought it would be expensive, but I didn't expect the price to be quite cheap.

Then he worried, would there be no good products at such a low price?

But after they sent two prototypes, everyone felt relieved once the experiment was put online.

Some people are even surprised, is this still our machine tool?

It can’t be assembled again!

But when they are salesmen, I proudly tell them that this is definitely a 100% self-produced machine tool.

Almost everyone's jaw dropped!

It’s really 100% domestically produced!

Not only rice, but also the manufacturing companies invested and supported by Quanye Fund almost all use Guangyang.

For example, Risheng Elevator, some of their equipment is processed using Guangyang's machine tools.

There are also Hanyin printers. Their printers also have some core components, which are processed by Koyo machine tools.

Even Shennong Agriculture, which conducts container farming, many of the pipelines inside are processed using Koyo machine tools.

In fact, as far as their company is concerned, there is no need for Guangyang Machine Tools at all.

But the boss just has money and is willing to play...

There are also many private shipbuilding companies near Bincheng. Nowadays, foreign machine tools in the factories have basically disappeared.

Almost all Qingyishui used are Spark Technology's second-generation flexible processing machine tools and Koyo's Wuzhou CNC center.

Spark Technology’s flexible processing machine tools are mainly used to process some difficult workpieces.

For example, some complex pipelines designed by the shipyard itself, or marine crankshafts, engine blocks, etc.

Koyo's machine tools are mainly used to process workpieces with low requirements.

With such a high-low combination, the equipment purchase cost is not high, but the performance of the manufactured workpieces is quite superior.

The quality of the boats built has been greatly improved compared to before.

In addition, some local automobile manufacturing companies in Bincheng have also begun to purchase large quantities of machine tools from these two companies for use.

For example, Chery, which built a factory in Bincheng, used to use Japanese machine tools, but now it has also begun to purchase Koyo machine tools.

They even plan to move engine research and development to part of Bincheng, if for no other reason than to be closer to Xinghuo Technology.

Being able to get their technology spillover at any time...

You must know that this is a leading company, one of the few companies in the country that has been working hard in the engine field.

Several of their engines have made major breakthroughs in performance in recent years.

The power has been greatly improved, but the fuel consumption has been significantly reduced.

It is not even an exaggeration to say that although the performance of their main engine is not as good as that of BBA, compared with civilian brands such as Japanese, American and Volkswagen, it is already comparable.

A genius can remember the address of this website in one second: Mobile version reading address: