One Thousand Four Hundred and Ninety-Nine, a Good Man Has Done It to the End, and Sent the Buddha to the West!

Everyone can move, so you have to train moving targets!

In this way, it is already a miracle that fifty rounds can train an artillery squad...

So in fact, the upper echelons of the military have always been aware of the problem, and they have never had a good way to solve such a problem before.

After all, it is very simple to improve the quality of soldiers, that is, practice.

Just get enough ammo and let the soldiers go to training.

But the cannonball is okay, the barrel is enough to give people a headache.

There are only so many expenses per year, but the ordinary gun barrels cost hundreds of thousands, and the large ones or those on tanks can often cost millions.

If I really want the artillery to quickly form combat effectiveness, then dozens of these barrels may be scrapped a year.

And you can't say, just practice for a year.

In order to maintain the level of the artillery squad, you will also have to train in the coming year, which means that one squad will have to destroy dozens of them in the coming year.

And you have to constantly train new people, which means that you have to spend more on gun barrels.

In fact, our artillery training is much better now than before, although it is impossible to let the soldiers open up to fight like the old beauty.

But at the very least, you can get a few rounds, or dozens of rounds of live ammunition a year.

Of course, this is also distinguished from the situation of the troops. From the ordinary level to the A-level military service, naturally the higher the level, the more opportunities to practice.

But this is far from enough, especially in the face of the current complex international situation.

Across the sea in the south, there are people who are constantly provoking things.

And the non-stop neighbor on the other side of the roof of the world, these variables may burst open one day no one can tell.

Therefore, the best solution is to keep the same and adapt to the changes, but how to solve the training problem of the soldiers.

This cost reduction has become the primary headache for the military.

Previously, for the barrel rifling, we didn't have a very good solution, and we could only bite the bullet and pile up the material.

Often only one barrel is made, and a dozen or even dozens of barrels have to be scrapped.

Because this is really the most difficult step in the cannon-making process, because you can't see the whole process at all, and you can only complete the entire production process through the feeling of the old employees.

Don't say we can't do it, it's the same with the US.

But Mi Duo has a lot of money, and they waste it.

If it is made into one barrel, it is nothing if a dozen barrels are scrapped. Even if hundreds of barrels are scrapped, people can still afford it.

After all, the trillion-dollar military spending a year is no joke.

The military expenditure of their family is equivalent to the sum of the military expenditure of the next seven families.

If the money is not enough, just turn on the money printing machine and start printing, anyway, the whole world has to pay for them.

This is the confidence of the American people, but we don't have the confidence they have now, so we can only think of ways from other aspects.

So this time, when the military saw the appearance of the robot that can drill holes for iron ingots in Xinghuo Factory, it was very excited.

You must know that the rifling of this gun barrel is a very delicate job, and it is very precise.

Because the working environment of the gun barrel itself is very harsh, the inside of the gun barrel often faces high temperatures of more than 3000 degrees and a huge impact force.

Therefore, the wall of the gun barrel must be uniform in thickness, otherwise, it is very easy to crack or even explode due to uneven force.

Therefore, when rifling, you must ensure that the depth of each rifling should be very uniform and tidy.

There can be absolutely no inconsistencies.

Otherwise, you're just waiting for the shells to fly, accuracy jokes, and chambers to explode.

This is also the main reason why a dozen or even dozens of gun barrels are often abolished to produce a qualified gun barrel.

Because even if there is no problem in the production process, strict inspections must be carried out after the production is completed.

Not only to check whether the rifling is consistent in depth, but also to check whether the barrel wall is uniform in thickness, and at the same time, take a lot of X-ray films to ensure that there are no cracks inside the barrel.

If it was before, the military didn't have a good way to deal with such a problem. ,

We can only rely on the old masters of those military factories to produce gun barrels completely by experience.

But now that they saw the industrial robots of Xinghuo Technology, they started to think.

This thing can actually drill a hole in such a big lump of iron. ,

This Nima is like carving on an iron ingot, and the most amazing thing is that they actually carved it.

They actually carved a very complex cavity structure on a piece of iron lump.

And this cavity structure is fully capable of serving as a hydraulic valve.

This is quite remarkable. You must know that such technology is not available even in the United States.

And if an enlarged version of such a machine tool can be manufactured and used in the production of gun barrels, then many processes can be reformed or omitted.

For example, the self-tightening step of the gun barrel, we have always used the hydraulic method in our country, which is actually very cumbersome.

And we are not very good in hydraulics, so in fact, this step is very difficult to do.

It can be said that it is quite time-consuming and labor-intensive. The reason why we can persevere is actually because of the low labor in our country.

In the United States and Germany, in fact, they are already using a new physical process to achieve self-tightening.

To put it bluntly, it is to use a special equipment to penetrate a piece of software into the fine blank of the gun barrel and continuously rotate, rolling back and forth.

This physical method is used to eliminate the stress on the inner wall of the gun barrel, which is more effective than the hydraulic method. ,

And we have not been able to carry out similar operations because of the lack of equipment.

And now that we have such a machine tool, we can find a way to complete this step through this machine tool.

In addition, it is the step of processing the barrel rifling.

In the past, because there was no way to see the inside of the gun barrel during processing, the rifling process could only rely on the experience of the master.

Now, the industrial robot of Xinghuo Technology can directly see through a large square iron ingot.

It also allows the drill to pass through perspective while working inside the iron ingot, and then perform precise navigation.

The drill can always move forward according to the set parameters, and the processing failure will not be caused because the situation inside the iron ingot cannot be seen.

This Nima is absolutely a miracle.

Everyone knows that this must be related to the 3D perspective imaging technology jointly developed by Sunshine Hospital and the Ninth Laboratory.

It's just that everyone didn't expect that this thing can also be used in industry.

In the past, this kind of perspective technology was used in the medical field, and everyone could accept it.

But what makes everyone a headache is that the Ninth Laboratory and Sunshine Hospital have never published any papers.

It has never explained the principle of this kind of equipment, which makes many organizations who want to copy them hate their brains.

Not only those scientific research institutions in the United States, but even many domestic scientific research institutions hate them to the point of itch.

In the past, there were no scientific research institutions in China. Under the banner of learning, I wanted to visit the Ninth Laboratory and Sunshine Hospital.

But every time, they were beaten haha ​​and bypassed.

No, if the level of the other party is a little bit worse, the Ninth Laboratory and the Sunshine Hospital, then they won't kill you at all.

You are nothing, what am I asking you to learn?

Don't think you're so careful, we don't know.

And they did this, which made many domestic institutions curious to death.

However, since the United States, Europe, and Japan, there have been rumors that someone wanted to violently borrow this self-service medical check-up device, but it ended up causing an explosion.

After the accident that caused casualties, many people with ulterior motives in the country also stopped.

After all, for such a device, it's not worth it if you finally take your life on it.

On the military side, although they are also very interested in this equipment, they have never made a move.

Because the meaning of the above is also very clear, there are not many such good companies, and the attitude of the team behind them is also clear to us, we should not cause trouble at this time.

At any rate, this company is in the country, and it also gives us a long face.

And now that the team behind this company is very friendly to us, the military can no longer hold back.

After he understood Minister Li and Director Zhang's request for Spark Technology, Xiao Feng directly asked a few cloning experts to discuss it.

The meaning of several experts is very simple, this kind of barrel is completely trivial to them.

As long as the machine tool is enlarged several times, and with their own flexible processing characteristics, as long as the drill bit is hard enough, they can immediately reduce the production cost of the gun barrel by ten times.

When the bosses on the opposite side heard such an answer, they couldn't help it any longer.

Even the big bosses who had been very serious before, couldn't hold back at this time.

Tenfold lower production costs? Doesn't that mean that soldiers can spend more money on training?

The combat power does not need to be increased tenfold, as long as it is doubled, they are enough!

The atmosphere in the private room immediately became lively, and even several bigwigs actually got up and toasted Xiao Feng in person.

After three rounds of food and wine and five flavors, a big guy with glasses suddenly asked again.

"Mr. Xiao, do you have any research on helicopter flight?"

At this time, Xiao Feng heard black lines all over his head.

Boss, I'm not a military expert, how can I know about the helicopter's aeroengine?

But he also knew that there must be problems waiting for the army.

He has helped the Air Force, and the Navy has difficulties, and he has also reached out.

Now that the army needs it again, then he can only be a good person to the end, and send the Buddha to the west!

"Uh, I really don't know much about this. Otherwise, you guys can introduce the situation and see if we can cooperate and overcome these difficulties together?"

txt download address:

phone-reading: