Chapter 1077: Guardian Type I

Under the busyness of countless people day and night, the three-year residence time in the camp territory has passed by in a flash. After three years, the integration of technology has greatly increased the strength of the war technology system of the fleet. Materials, weapons, and energy have all been significantly improved.

But there is also a product that cannot be replicated within three years, the geta ray.

Even though all the technologies contained in the prototype Geta have been completely analyzed in the past three years, and even Luo is sure that he can create a more perfect body than the prototype Geta, but because the energy source of the Geta ray cannot be replicated In this case, even if a more perfect body is produced, it cannot become a real Geta due to the Geta rays.

According to the calculations of Luo and his subordinate researchers, it will take another seven years to reproduce Geta Ray at the current speed. Xiao Ran does not know how many years it took the doctor in the Geta World to copy Geta Ray. It still takes seven years to conquer the power of all the territories of the entire legion, and a total of ten years has been considered a very long time.

It is not difficult for the entire research department to completely crack Geta's other technologies. Speaking of Geta, except for Geta's rays, the technical content of other places in Geta is not as high as imagined, even in the 0079 world. The technical level can be fully analyzed, and the really special thing is only the geta ray.

Compared with the purely technical level, the technical content of Geta NEO is higher than that of Geta, but Geta NEO is also completely analyzed. In terms of materials, Geta NEO is manufactured because of Geta's active alloy. The most relevant difficulty has already been resolved, and other technologies are really nothing to the current scientific research force.

After the first year of the Geta NEO trial machine, there have been three generations in the territory. The first generation Geta NEO trial machine is completely imitated by Geta NEO, except for the additional weapons. Slightly different, there are more beam rifles, beam sabers, beam weapons that can be used in the three forms, and the appearance after transformation is not much different from Geta NEO.

By this generation, the territory actually has all the capabilities to manufacture Geta NEO, but the department that can develop the Geta NEO body is not satisfied with that. According to the current situation of the fleet, it has carried out the second research and development again. , the second trial machine was offline only half a year after the first trial machine was offline, but the second newly developed trial machine was completely different from the previous version.

The idea of ​​the first generation is copying, while the idea of ​​the second generation is fusion, so that the three mechas of Geta NEO have excellent individual combat capabilities even when they are separated, and the fusion of existing fleets is also a fighter. Due to the situation, making the three combined fighters also have the ability to transform has become the key goal of this research and development.

After half a year of research and development,

The flexible use of Geta alloy means that the first test machine of Geta NEO II, completely redeveloped and manufactured, has been rolled off the production line. It combines the products produced by the deformed fighter technology currently owned. The Geta fighter has a very big difference, and already has many features of the fleet deformation fighter VF-30 series.

The experiment was finally successful. Three fighters with three-stage deformation capabilities were successfully combined into a brand new Geta, which looks completely different from the Geta NEO. The new Geta is thinner and has a deformed structure. The skeleton is also exposed in many places. This is a complete test machine, not even equipped with a weapon.

However, it took a year from the second generation to the third generation final product, and the whole year was just to supplement and improve the second generation test aircraft, which was shorter than the time it took to directly construct the new fighter aircraft. It was longer, but the end result was extremely gratifying.

The final new machine completely abandoned the name Geta, because this machine has not much relationship with Geta except that it can be combined with three machines like Geta, and it has completely become a brand new series.

The three fighters have the same three-stage transformation ability as ordinary deformed fighters before they are combined. The fortress form and MS form are the same as the fighter form, but the appearance is more different from ordinary fighters.

The three newly manufactured combined fighters are different from each other. They all use Gaita alloy as the outer armor. The ductility and flexibility of the alloy combined with the multi-stage deformation structure are used to achieve the purpose of deformation, and all of them are better than normal deformation. The fighter is slightly larger.

The first machine body is a high-speed machine body, which has seven layers of appearance similar to the VF-4, an ancient model, but it must be more streamlined, bigger, stronger and thicker, so it looks naturally good-looking and domineering. Many, with recyclable and foldable small flying wings using a modified beam grat gun, the rear thruster module is obviously stronger than the normal body.

After the body is bigger and deformed, the body will naturally be bigger, but even so, the feet look a little thicker, and some weapons are added, such as two round small positron cannons, and these two small positron cannons It directly replaces the arm, and the palm directly 'grows' out of the muzzle of the positron cannon, and can be 'retracted' back when not in use. Adding the positron cannon is the two handles mounted on the wrist. The beam saber's combat capability alone is no worse than that of a normal deformed fighter.

The second machine is a multi-purpose airframe, which can be turned into a reconnaissance machine by adding reconnaissance equipment, and can be turned into a sniper machine by using a sniper rifle. The Mirage system is also installed, and the amount of weapons carried is also the least.

In addition to the standard missile launch capability, the beam saber, the beam guns that are installed on the body of a separate body, all other weapons will be matched according to the individual needs when attacking, and selected according to occupation or personal ability Sniper rifles, beam cannons or standard beam guns, so both special and general are emphasized in terms of shape and use.

Special refers to giving special abilities to the body itself or after combination, like the Mirage system, solar furnace, λ-DRIVER, thermal energy ray launcher, and the Secumu system that can be used by ordinary people. All these things are installed on the No. 1 machine, so the airframe itself does not have the conditions to install other weapons. It can be said that the airframe that chooses the driver most but also the least.

People who can use the power of λ-DRIVER are more able to use the ability of this machine, and people who cannot use λ-DRIVER can also use it.

In terms of shape, the general shape of VF-171, which is the most common and has undergone several evolutions, has undergone some special modifications due to the need for combination, which has made some changes in the shape of the body, and the size is the same as the No. 1 machine. A circle and a few more interfaces.

The No. 3 machine is a complete heavy-fire machine with the most powerful firepower and the most powerful energy source. It can be regarded as an arsenal in itself. It has been remodeled, and it has beam-directed armor. Its defensive power and firepower are the highest among the three mechas, but its flexibility is the lowest.

Missiles, beam cannons, positron cannons, GN dragoons, solar furnaces, beams deflected to armor, have the ability to launch large missiles, that is, MED warheads or reaction bombs, and completely extend the body in the direction of firepower and armor.

The three airframes all use Geta active alloy as the armor material, so it is not surprising that the armor changes from square to circular due to the deformation of the internal skeleton when deforming, with the addition of VPS and energy conversion The armor is used as a support, and there is no need to worry about the strength of the skeleton and the strength of the armor.

The three machine bodies also have three different forms after combination. The first unit is the general combat form of the head. After combination, the feet of the first unit become the arms of the combined machine. Two positron cannons will appear on both sides of the head. Unit No. 3 is located in the middle, Unit No. 3 is located below, the flying wings of Unit No. 2 have become the flying wings of the rear and body, and the arms of Unit No. 3 have become skirts and shields with beam deflection armor capabilities. Yes, the original beam Gatling gun has become a huge beam saber with the strongest versatility.

The No. 2 aircraft is in the form of space combat. Because of the relationship between the No. 3 aircraft and the middle, the feet of the No. 2 aircraft have become a pair of adjustable flying wings. It has the fastest speed in the three forms, but it does not have strong land combat capabilities. The main attack method is shooting, and it can maximize the effect of λ-DRIVER.

The No. 3 machine will get the strongest firepower in all forms. The four giant cannons that cannot be used in other forms will be extended, and all the weapons of the machine will be used. The main attack methods are fire coverage and Fire bombing.

Generally speaking, the No. 1 form emphasizes general-purpose capabilities, the No. 2 form emphasizes high-speed combat capabilities and special operations, and the No. 3 aircraft emphasizes maximum firepower, and the same is true when separated. However, no matter in which form, once the combined Mirage system is universal, the solar furnaces installed on the second and third units can also get the same frequency, and the assisted driving of the third unit can be mass-produced Hello, the GN Dragoon It's not a problem at all to use.

This new body is named CD-1, also known as Guardian 1. The three machines are separated into a C-machine body, and after being combined, they become a B-machine body. Perhaps it is also because it is in the territory under the jurisdiction of the real area. It was built, so it was also evaluated according to the level of the real area.

After the completion, only fifteen sets were produced in total, and one set was taken over by Xiao Ran and placed on the Galaxy Diva, with Al Elf driving the No. 1 unit, Moses driving the No. 2 unit, and Billy driving the No. 3 unit. number machine.