Main Text Volume Section 168 Hot Melt Method

The Pamiji Plateau is located in the southwest of the Kingdom of Eternal Night, a bilateral area with the Kingdom of Guman. Because the average altitude is above 3500 meters, there are few people coming and going. Except for some native primitive tribes, the Pamiji Plateau is an indisputable human restricted area.

But on this day, in the blue sky that was as bright as bleach, a huge black shadow flashed with crystal light.

It was a strange thing, and it was hard to say whether it was alive or dead. Its overall structure was a flat and huge transparent crystal. There were white silk threads in the crystal, which looked like ice... No, it should be ice.

Because a plateau eagle flew over it a hundred meters away, and it was directly frozen into an ice sculpture and fell down.

If it was ice, it must be a dead thing. But why was it misunderstood as a living thing? It was because this huge piece of ice, about 20 meters long, had equally transparent broad wings on both sides, and the style of the wings was similar to that of a swan. Whenever the wings flapped, crystal ice feathers fell.

The sunlight on the plateau was fierce, shining the winged ice crystal clear and bright.

On the ice, several mysterious people in white robes were resting with their eyes closed. The endless freezing power of the ice seemed to cause no harm to them. On the contrary, their figures became more and more ethereal in the white mist.

If you look closely, you will find that the backs of the white-robed people are all embroidered with a frozen crescent moon.

…

On the first day of the second half of the Flowery Month, after half a month of depression, Angel finally recovered from the consequences of the backlash of the magic.

He almost immediately devoted himself to the practice of magic.

He first learned the basic magic of epigraphy, the heat melting method and the condensation method. In his plan, he wanted to reach the top of the Sky Tower with two necessary conditions, one of which was alchemical weapons; the other was a complete set of defensive magic.

Of these two necessary conditions, learning the set of magic should not be a problem, but it would take some time to master it. But Angel was a little unsure about the production of alchemical weapons. After all, it was the product of the combination of two civilizations, and the future was uncertain.

The most important thing was that Angel had no idea whether he could cross the threshold of the alchemy world. If he couldn't even become an alchemy apprentice, then all other plans were just fantasies.

So, Angel immediately focused all his attention on the heat fusion method.

The heat fusion method was the first threshold for alchemy apprentices.

The essence of the heat fusion method was actually the long-term resistance between the fire element and magic power, which generated extremely high heat. Then the range of high heat was controlled through the magic model to prevent it from hurting oneself.

This magic trick was exactly the opposite of the magic tricks of the three major structures. The magic model was not for constructing the heat fusion method, but for limiting the high temperature of the heat fusion method.

Angel took out a piece of paper, which was densely written with data and formulas. This was the model result he derived for the heat fusion method when the magic backfired a few days ago.

After remembering several key coordinate points of the model diagram, Angel closed his eyes and entered a meditative state.

The mind space has been restored to clarity. The "lollipop" he constructed is alone in the chaos. The singularity is slowly rotating, purifying the original magic.

Angel did not care about the singularity, but released the pure magic from the magic source to build the magic model of the hot melting method.

With the positioning of the universal axis, the magic model was built in almost two or three seconds.

After the magic model of the hot melting method was built, there was no abnormality. It just hung in the mind space, without collapse or disintegration, and there was no impulse to release it to the outside.

Angel turned the magic model to his fingertips, still without any feeling, and no trace of any ordinary.

"This model is indeed very different. Even if it is suspended outside the body for a long time, it has never collapsed. It is as solid as a stone." Angel said secretly.

Since there is no problem with the model, Angel simply started to "warm up".

The combination of fire element and magic, in simple terms, is to release magic from the body and rub and combine with the fire element outside.

This step seems easy, and the magic power output to the body is also very small, but the patience and control required by it are difficult for ordinary wizard apprentices to do.

Patience means continuous output of magic power and slow warming up. The time required for this process is determined by the content of fire elements in the air. In places where fire elements are active, the warming up time is about a few minutes, but in places where fire elements are lazy, the warming up may even take several hours, or even more.

Basically, patience is not a problem for wizard apprentices.

But the next step of control is the most difficult point in learning the hot melting method, and it is also one of the reasons why alchemy excludes most wizard apprentices.

During the warming up process, magic power must be output from the body to the outside of the body. Although the magic power consumption is very small, it must be continuously released at the same amount of magic power.

A little more, a little less, even a little bit, will lead to preheating failure.

It is almost difficult for wizard apprentices to control the measurement accurately.

...

Angel also began the warm-up step, continuously outputting magic power from the body to the outside. When he first came into contact with the fire element, it was easy to withstand.

But after 2 seconds, the warm-up failed. The reason was the same as other wizard apprentices, the amount of magic power was not accurately controlled.

In the second test, Angel carefully released the magic power little by little. With his high concentration, he lasted for... 3 seconds this time.

Angel conducted the third, fourth, and tenth tests, and the highest record was to maintain the magic power for 4 seconds. The others were basically hovering around 2 seconds.

In places where the fire element is active, this warm-up takes more than two minutes. But now he can't even break through 5 seconds.

Angel suddenly felt a little depressed. Didn't he have the talent to learn alchemy?

The magic power was almost consumed at this time, and Angel was in a bad mood. He simply closed his eyes and recovered the magic power through meditation.

In a blink of an eye, five hours passed.

During the meditation, Angel's mood gradually calmed down.

He also figured it out. It was normal to be hit. Nothing can be achieved overnight. He will continue to try. If there is really no way to control the magic power, then it can only be said that he has no fate with alchemy.

At this time, the magic power in the magic source has reached full again. Angel took out dry food and filled his stomach while thinking about how to control the magic power.

Controlling the power is definitely not something that can be done carefully. Angel previously focused almost all his attention on control, and it was difficult to achieve perfect control.

Angel thought: Human power is always exhausted, can we use external forces?

Speaking of external forces, how to control the amount, the simplest way is to limit the amount of water flowing out through the pipe. Just like drinking water with a straw, the straw can effectively limit the amount of water flowing out.

But he can't insert a pipe into the thinking space. Besides, can magic power be put into a pipe?

Pipeline... limit...

Angel kept repeating it, and various pictures flashed in his mind. Suddenly, a picture full of dotted lines flashed through his mind.

"I thought of it! I can't insert a pipe, but I can make a pipe myself!" Angel's face flashed with excitement: "It can be done with the universal axis!"

The universal axis is the manifestation of the thirty-six-bit space coordinate system positioning method.

The universal axis transforms the thinking space into a collection of countless dotted lines, and each point can be transformed into a space coordinate point through the universal axis. Angel only needs to build a three-dimensional channel in the thinking space, and use the universal axis as a measurement standard, and the amount of magic output can be controlled!

Angel thought of this and immediately started the experiment excitedly.

It took a little while for a channel determined by the Universal Axis to connect from the source of magic to the outside.

Angel took a deep breath and began to draw magic power from the source of magic. He was careful not to let the amount of magic overflow from the Universal Axis channel.

2 seconds, 3 seconds, ... 19 seconds, 20 seconds.

After 20 seconds, the warm-up failed again.

However, Angel did not show a frustrated expression this time, because he was very sure that he had solved the problem of measurement! From 4 seconds to 20 seconds is the evidence!

The reason why he failed this time was not that the measurement was not well controlled, but that the rate fluctuated.

As long as the problem of measurement is solved, other problems are minor problems.

It took a while again, and the rate problem could achieve a basic balance under his constant attention.

With both the measurement and the rate solved, Angel started the warm-up again.

2 seconds, 3 seconds, ... 19 seconds, 20 seconds ... 1 minute 10 seconds ... 1 minute 30 seconds ...

At 2 minutes, Angel failed again.

But this time, the failure had nothing to do with the technique, but ... his fingers were burned.

He had been focusing on solving the preheating problem, but forgot one thing, the preheating position must be within the magic model, otherwise, it was only a matter of time before he got burned.

...

On the third day of the second half of the Flowery Month.

Angel moved the stove in the kitchen to the basement.

Light the fire.

The scorching heat slowly spread in the basement.

Angel sat by the stove, closed his eyes and began to meditate. After about half an hour, Angel stretched out his mental tentacles and felt the activity of the fire element in the air.

- With the stove as the center, the activity of the fire element was several times higher than before.

Angel felt that it was almost done, so he stood up and came to the pile of wooden boxes on the other side of the basement. These wooden boxes were filled with non-level materials purchased from Prome Alchemy Shop.

Angel took out a piece of black and red metal from the wooden box.

This is the Demon Blood Copper, which is the most common material he bought. It is the lowest grade of the Blood Copper series, and is a copper ore that has been stained with Demon Blood and nurtured for many years.

The hardness and wear resistance of items made of Demon Blood Copper will be greatly improved, and there is a very small chance of obtaining special effects.

Angel took out the Demon Blood Copper and returned to the stove.

Angel used the hot melting method to construct a trick model, and then output magic power to slowly combine with the fire element, and time passed bit by bit.

Fifteen minutes later, the hot melting method was formed!

Angel could feel the intense high temperature in the model at his fingertips. However, it was bound by the model and there was no sign of leakage.

Angel put the Demon Blood Copper in the hot melting method.

As time passed, the Demon Blood Copper slowly showed signs of melting in the hot melting method...